|As per the Model
|10 micron HDPE media
|3 micron HDPE media
|Standard size 0.3 micron 99.97% efficiency / minipleate HEPA
|Capsule perforation with GI powder coated or SS 304
|Installation of HEPA
|By Microprocessor controller
|1200mmwidth width (or as per site condition)
|30 - 120mm
|GI powder coated / PPGI / SS 304
|20 / 22 / 24 G
|Polyurethane Foam (PUF)
|SeaIing of joint
|Using silicon sealant
|5mm toughened glass on both side fixed with VHB tape & Gap Filled with silicon sealant.
A Quality Air-management system that provides An Overhead Laminar Airflow with positive pressure system like conventional air handling unit.
--Clean,particlefree and germ free vertical downward air flow on and around table area (0.3 micron HEPA filtered air)--Positive pressure inside the theatre to prevent outside air from entering into the O T.--10/20% of fresh air induction re-circulation of 80% preaped air
--Air-conditioning integrated with the system.--Delivers 90- 10 FPM air Velocity--Air conditioning cooled air at mean temp around 18-22 C --degrees, Humidity 60% NMT.--Positive pressure up to 20 Pascal ( 2mm at water level or .05 inches of water) as per ISO 14644 Clean Room standards--20% fresh air to maintain by Positive pressure system through Hepa filters.
As the system is switched On', the air from the OT is sucked through Return Air Rise and delivered to t he Air Handling Unit.The AHU pre-filters the air to 10 & 5 micron, kills the micro-organisms throught UV radiation, further cools the air and blows it into the plenum which has Hepa Filters of 0.3 micron. This germ free air is delivered on and around the table with a continuous downward air flow.When the system is 'On , outside contaminated air cannot seep into the OT due to the positive pressure created inside by the PPS incorporated in the system. Therefore if the door is opened and closed when required at the time of procedure, the air from inside will always travel outside. This will help to retain very high level of purity in the OT atmosphere at the time of surgery. Remote Control switches are provided for I On I / I Off I and other functions.
Modular wall panel & ceiling panel is sandwich type panel made out of Gl powder coated sheet on both side / PPGI sheet on both side / one side PPGI & other side SS 304 sheet with puff (polyurethane foam) as in-filled.
--Ceiling Panel Puff Panel
: Thickness 50mm hanged with ceiling with fasteners rod & section & gap filled with silicon sealant.Ceiling Tiles
: Gl powder coated 2ft X 2ft and gap filled with silicon sealant.